2. PRODUCTS
  3. FT-IR/FT-NIR Spectrometer
  4. FT-IR/FT-NIR Spectrometer
  5. ATR Probe

Near & Mid IR-fiber ATR-Probes produced for
any type of FT-NIR, FT-IR Spectrometer

Art Photonics FlexiSpec® ATR Probes

Standard ATR Probe

High throughput in any part of Near- and Mid-IR spectrum No dead zone Flexible and robust for industrial applications in harsh environment Compatible with all spectrometers and automated process-interfaces

Specifications:
  1. Tip Protection: crown sized (optional)
  2. Probe Shaft: 300 ± 5 mm
  3. Shaft Material: Hastelloy C22
  4. Shaft OD: 6.3mm or 12 mm
  5. Total Length: 1.5 ± 0.05 m
  6. Flexible fiber: 1.2 m, 2 legs of 0.5 m length each
  7. Terminations: 2 x SMA905
  8. Sealing: PEEK or PTFE
Tip material Spectral range Temperature range Pressure Max
Diamond 600-1900 cm-1 -150°C / + 140°C 200 Bar
Silicon 600-3100 cm-1 -150°C / + 140°C 10 Bar
Germanium 600-3100 cm-1 -150°C / + 80°C 100 Bar
Cubic Zirconia(IR) 1550-9000 cm-1 -150°C / + 90°C 100 Bar
Cubic Zirconia(NIR) 4550-25000 cm-1 -150°C / + 200°C 100 Bar
Sapphire 4550-25000 cm-1 -150°C / + 200°C 100 Bar
High Temperature ATR Probe

High throughput in selected parts of Near & Mid InfraRed-spectra ATR-tip shaped for immersion in liquid flow without dead zone Robust for industrial applications in harsh environment up to 250°C Resistant to high pressure Compatible with all spectrometers and automated process-interfaces

Specifications:
  1. Tip Protection: crown sized (optional)
  2. Probe Shaft: 300 ± 5 mm
  3. Shaft Material: Hastelloy C22
  4. Shaft OD: 6.3mm or 12 mm
  5. Total Length: 2 ± 0.05 m
  6. Flexible fiber: 1.7 m, 2 legs of 0.5 m length each
  7. Terminations: 2 x SMA905
  8. Sealing: PEEK
Tip material Spectral range Temperature range Pressure Max
Diamond 600-1900 cm-1 -150°C / + 230°C 200 Bar
Silicon 600-3100 cm-1 -150°C / + 230°C 100 Bar
Cubic Zirconia(IR) 1550-9000 cm-1 -150°C / + 200°C 100 Bar
Standard Laboratory ATR Probe

Evanescent absorption spectra without dead zone problems Optimal ATR- crystal selection to match customer application Cost effective solution for in-line reaction monitoring

Specifications:
  1. Probe Shaft: 150 ± 5 mm
  2. Shaft Material: PEEK
  3. Shaft OD: 6.3mm
  4. Total Length: 1.5 ± 0.05 m
  5. Flexible fiber: 2 legs of 1.35 m length each
  6. Terminations: 2 x SMA905
  7. Sealing: PTFE
Tip material Spectral range Temperature range Pressure Max
Diamond 600-1900 cm-1 -100°C / + 140°C 10 Bar
Silicon 600-3100 cm-1 -100°C / + 140°C 10 Bar
Germanium 600-3100 cm-1 -100°C / + 80°C 100 Bar
Cubic Zirconia(IR) 1550-9000 cm-1 -100°C / + 140°C 100 Bar
Cubic Zirconia(NIR) 4550-25000 cm-1 -100°C / + 140°C 100 Bar
Sterilizable ATR Probe

Fiber assembly is easy detachable. No need to retract the whole probe out of the fermenter, just pull the fiber assembly out of the operational shaft and store it separately. Sealing the operational shaft is possible for the sterilization, cleaning, deactivation or any other treatment.

Specifications:
  1. Tip Protection: crown sized (optional)
  2. Probe Shaft: 300 ± 5 mm
  3. Shaft Material: Hastelloy C22
  4. Shaft OD: 6.3mm or 12 mm
  5. Total Length: 1.5 ± 0.05 m
  6. Flexible fiber: 1.2 m, 2 legs of 0.5 m length each
  7. Terminations: 2 x SMA905
  8. Sealing: PEEK
Tip material Spectral range Temperature range Pressure Max
Diamond 600-1900 cm-1 -150°C / + 140°C 200 Bar
Silicon 600-3100 cm-1 -150°C / + 140°C 100 Bar
Germanium 600-3100 cm-1 -150°C / + 90°C 100 Bar
Cubic Zirconia 1550-9000 cm-1 -150°C / + 90°C 100 Bar
ATR-Detachable Loop Probe

High throughput at Mid InfraRed range On-line absorbance spectroscopy of liquids, pastes & soft solid surfaces Compatible with all FTIR, QCL and IR- Filter spectrometers Cost effective alternative to more expensive ATR-IR-fiber probes Replaceable ATR Loop PIR-Fiber Tips

Specifications:
  1. Probe Shaft: 80 mm
  2. Shaft Material: PEEK
  3. Shaft OD: 10 mm
  4. Total Length: 1.1± 0.05 m
  5. Flexible fiber: 2 legs of 1.0 m length each
  6. Terminations: 2 x SMA905
Tip material Spectral range Temperature range Pressure Max
Polycrystalline 600-3100 cm-1 0°C / + 80°C 3 Bar
Chalcogenide 1550-5000 cm-1 0°C / + 80°C 3 Bar
Flat Tip Diamond ATR Probe

Flat-tip ATR crystal Suitable for measuring sensitive samples e.g. skin without damaging them Easy to clean Excellent for measuring sticky or messy samples

Specifications:
  1. Probe Shaft: 300 ± 5 mm
  2. Shaft Material: Hastelloy C22
  3. Shaft OD: 6.3mm
  4. Total Length: 1.5 ± 0.05 m
  5. Flexible fiber: 0.7 m, 2 legs of 0.5 m length each
  6. Terminations: 2 x SMA905
  7. Sealing: Gold
Tip material Spectral range Temperature range Pressure Max
Polycrystalline 600-1900 cm-1 -150°C / + 140°C 100 Bar
Download

  • Art Photonics – mid IR ATR Probe Flyer

    DOWNLOAD

  • Art Photonics – mid IR ATR probe for harsh environment Flyer

    DOWNLOAD

  • Art Photonics – mid IR ATR Probe for Lab application Flyer

    DOWNLOAD

  • Art Photonics – mid IR ATR Probe shaft in shaft Flyer

    DOWNLOAD

  • Art Photonics – mid IR ATR Loop Probe Flyer

    DOWNLOAD

  • Art Photonics – Fiber optic probes – Catalog 2024

    DOWNLOAD