This NIR laboratory equipment gives you a fast and easy Quant analysis.
The arid-zone open sample compartment of the MB3000 addresses all the needs of the modern analytical laboratory. It can hold a wide variety of easily swappable ABB or third-party accessories that do not require alignment.
Universal heatable vial holder adapted for vials of 5, 8 and 12 mm OD with integrated temperature controller.
ICL SL-4 Heavy Duty varying optical pathlength liquid cell.
The Bottle Sampler rotates continuously during analysis mixing the sample. The rotation provides you with a solid representative scanning as all particles have an equal chance of becoming part of the resulting spectrum
Petri Spinner accessory for solids (powders, grains, pellets, agrochemicals).
The Petri Sampler is used for a well-known and versatile method of scanning. It requires homogeneous samples with no segregation.
You place the sample in the petri dish, which is subsequently placed in the sampler. To minimise the effect from heterogeneity, the petri dish spins continuously during analysis. The petri dish can be made from either glass, plastic, or Teflon, thus enabling use near the production area.
You fill your sample into the AgriTube, seal it, and place it in the Spiral Sampler. The Spiral Sampler rotates and scans up to 375 cm2 surface in the highest FT-NIR quality offering a truly representative scanning. This is up to 20 times more scanning surface than a traditional petri dish solution.
Optimize your operator workflow with the easy to fill and re-usable glass tubes.
You get an optimal operator workflow with the easiest, cleanest, fastest sample presentation for all kinds of spreads.
Reuse the sampling cup without cleaning in between different samples – as the product is measured from the top. The sample is placed in the cup and a smooth surface is created by scraping. To minimise the effects from heterogeneity the cup spins continuously during analysis.
As the sampling cup is made of a plastic material it is safe to use in the production area
Single channel send/receive all reflective fiber-optic interface in Arid-Zone sample compartment. Quartz halogen source image size at fiber 0.6mm x 1.6mm. Detector views 2.5 mm diameter spot at fiber both with
NA of 0.28. Can be used with any type of fibers with SMA cable connectors.